Select Preset Codes For Other Components; Clearing All The Remote Control Settings - Pioneer HTP-SB300 Operating Instructions Manual

05 Controlling the rest of your system
Select preset codes for other
components
SYSTEM
SYSTEM
INPUT SOURCE
INPUT TV CONTROL
HDMI1 HDMI2
OPTICAL COAXIAL INPUT
1 While pressing the
press and hold the '
seconds.
2 Press the INPUT SELECT button for the
component you want to control.
3 Use the number buttons to enter the
preset code.
You can find the preset codes on page 31.
If the correct code has been input the power of
the component being input will turn on or off.
The power of the component being input will
only turn on or off if that component is able to
be turned on directly by remote control.
4 Repeat steps 2 through 3 to try a different
code, or to enter a code for another
component you want to control.
5 When you're done, press
28
En
CH
ENTER
button,
1 ' button for three
Clearing all the remote control
settings
You can clear all presets and restore the factory
default settings.
• While pressing the
DISPLAY
press and hold the '0' button for three
CH
seconds.
CH
Default preset codes
INPUT SELECT
button
HDMI1
HDMI2
OPTICAL
COAXIAL
.
button,
Preset code
2 1 2 7 (BD)
2 1 2 2 (DVD)
2 1 2 1 (DVR)
1 1 2 0 (VCR)
0 1 2 0