Display Messages - Casio EX-Z200RD - EXILIM ZOOM Digital Camera User Manual

User guide
Table of Contents

Advertisement

Display Messages

ALERT
Battery is low.
Cannot correct
image!
Cannot find the
file.
Cannot register
any more files.
Card ERROR
Check
connections!
Files could not be
saved because
battery is low.
Folder cannot be
created.
LENS ERROR
LENS ERROR 2
The camera's protection function may have activated
because camera temperature is too high. Turn off the camera
and wait until it cools down before trying to use it again.
Battery power is low.
Keystone correction of the image cannot be performed for
some reason. The image will be stored as-is, without
correction (page 56).
The image you specified with the slideshow "Images" setting
cannot be found. Change the "Images" setting (page 85) and
try again.
You are attempting to save a user BEST SHOT scene in the
"SCENE" folder when the folder already contains 999 user
scenes (page 52).
There is something wrong with the memory card. Turn off the
camera, remove the memory card and then reload it into the
camera. If this message re-appears when you turn the
camera back on, format the memory card (page 136).
IMPORTANT!
• Formatting a memory card deletes all its files. Before
formatting, try transferring recoverable files to a computer
or some other storage device.
• You are attempting to connect the camera to a printer while
the camera's USB settings are not compatible with the USB
system of the printer (page 102).
• Your computer is running Windows 98SE or 98 and does
not have the USB driver installed (page 110).
Battery power is low, so an image file could not be saved.
You are trying to record a file while there are already 9999
files stored in the 999th folder. If you want to record more,
delete files you no longer need (page 20).
This message appears and the camera turns off whenever
lens performs some unexpected operation. If the same
message appears after you turn power back on, contact a
CASIO authorized service center or your original retailer.
The Camera Shake unit may be malfunctioning. If the same
message appears after you turn power back on, contact your
retailer or a CASIO service center.
163
Appendix

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ex-z200

Table of Contents