Turtle Beach Ear Force XP300 User Manual page 7

XBOX 360 Setup (RCA)
®
Transmitter USB Cable
9
XBOX 360
AV Cable
(included with
Xbox 360 console)
RCA Splitter Cable
(included)
Xbox 360 Wireless Chat Setup
Connecting the XBA Bluetooth Chat Adapter*
®
1. Power on the Xbox 360 controller and plug the XBA into the
controller headset jack.
2. With the XBA powered-OFF, press and hold the button on the
XBA for 4 seconds to enter Bluetooth pairing mode. The LED will
begin to blink rapidly.
3. With the XP300 powered-ON, press and hold the Bluetooth
button (BT MFB) on the right ear cup for about 5 seconds to
power on the Bluetooth.
If this the first time you've powered-on the headset, the Bluetooth will automatically be in pairing mode.
If its not the first time the headset has been powered-ON, make sure the Bluetooth is powered-off and press and hold the BT MFB
button for about 5 seconds until you hear 3 fast beeps in the headset and the Bluetooth LED is flashing blue and red.
After a few seconds, the XBA and the XP300 will be paired. The XBA will automatically pair itself to the headset each time it's powered
on so you will only need to complete the pairing process during initial setup.
XBA Functions
Function Button Press LED
Power ON Single 1 blink / sec
Power OFF Hold 3 secs OFF
Mic MUTE Double Solid ON
Mic UNMUTE Double 1 blink / sec
Pairing Mode Hold 4 secs
(paired) 2 blinks / sec
(not paired) 1 blink / sec
* The XBA adapter is not compatible with the Xbox 360 chat pad and may not be compatible with third party controllers.
XBA LED
XBA Button
10