Jabra SUPREME User Manual page 14

- Tap the Answer/end button once to end the first call and
accept the new incoming call
QUICK REFERENCE TABLE FOR MANUALLY CONTROLLING YOUR
JABRA SUPREME
Function
Entering pairing
mode
Cancel pairing mode
Answer call
End a call
Reject a call
Initiate phone voice
dial*
Enable or disable
Voice Guidance and
commands
DISABLE
ACTIVE NOISE
CANCELLATION
Reset to factory
default
Download Firmware updates and additional languages
Go to jabra .com/SUPREME and download the latest firmware and
additional languages .
* Phone dependent
Action
Flipping boom arm to On position
Tap the Answer/end button
Tap the Answer/end button
Tap the Answer/end button
Double tap the Answer/end button to
reject an incoming call
Press the Answer/end button when
connected or not on an active call or
tap the Voice button and say "Phone
commands" to activate the voice
dialing feature on your phone .*
Press and hold the Voice button while
flipping the boom arm to On position .
You will hear "Voice on" when
you enable and "Voice off" when you
disable the voice features .
When in a call you can press the Voice
Control button to disable Active Noise
Cancellation feature . Press again to
enable .
Turn on the SUPREME and press
and hold the Answer/end, VOL+
button together for about 6 seconds .
When the SUPREME is reset it will
automatically go into pairing mode .
JABRA SUPREME
13