Tv (Rear); Power; Display; Cdcd Input Mute Cd - Sharp LC 32SH20U - 32" LCD TV Operation Manual

Watching TV
Method 1
Using CH A/V on the remote control unit or on the
TV.
You can change channels in several ways.
POWER
DISPLAY INPUT
CDCD
MUTE
CD
®@®
®®@
®®@
FREEZE SURROUND FLASHBACK
CZ) CD
SLEEP MENU
5
AUDIO CC VIEWMODE AVMODE
CD CD C:::)C:::)
CK)GD CE)CZ}
FAVORITE CH
SHARP
• If your cabte-TV system includes analog and digital
channels using the same channel number, your channel-
up function wilt scroll through the analog channel first,
then the digital channel. Although it may appear as
though the channel does not change, it actually moves
from the analog to the digital channel in sequence.
If you use channel-down, it will move in reverse, from the
digital channel to the analog channel.
Method 2
1 Press FLASHBACK to switch to the previously
tuned channel.
2 Press FLASHBACK again to switch back to the
currently tuned channel.
C
• FLASHBACK wilt not work if no channel has been
changed after the TV is turned on.
Method 3
Using remote control buttons 0=9, • (DOT) to select
channels for VHF/UHF/CATV/DIGITAL
To select a 1 or 2-digit channel number
(e. g., Channel 5):
Press 5-->ENT
• When selecting a 1-digit channel number, it is not
necessary to press 0 before the number.
• When you enter 0=9 only, channel selection wilt be made
if there is no operation within a few seconds.
To select a 3=digit channel number
(e. g., Channel 115):
Press 1-->1-->5->ENT
To select a 4=digit channel number
(e. g., Channel 22.1):
Press 2-->2-->• (DOT) -->1-->ENT
• When you enter 0=9 only, channel selection wilt be made
if there is no operation within a few seconds,
• If you push "0" by itself, nothing will happen,
• Complete the above steps within a few seconds,
• When you enter 0=9 and o (DOT), channel selection wilt
be made if there is no operation within a few seconds,
(_=16