Turning On The Tv; Channel Selection; Volume Adjustment - LG M2280D-PU Owner's Manual

TURNING ON THE TV

- When your TV is turned on, you will be able to use its features.
Connect the power cord and switch the AC power control switch on the TV to on. The TV
1
switches to standby mode.
■ To turn the TV on from standby mode, press the ꔰ / I, INPUT or CH▲▼ button on the TV
or press POWER, INPUT, CHꕭꕮor NUMBER (0 to 9) on the remote control.
Select the viewing source by using the INPUT button on the remote control.
2
■ This TV is programmed to remember which power state it was last set to, even if the power
cord is out.
3
When finished using the TV, press the POWER button on the remote control. The TV reverts to
standby mode.
!
NOTE
►If you intend to be away on vacation, disconnect the power plug from the wall power outlet.
►If you do not complete the initial setting, it will appear whenever the TV is switched on until the
initial setting procedure is completed.
►If the TV is unplugged once or turns off with the AC power control switch on the TV, you will need
to reset the Clock function.

CHANNEL SELECTION

Press CH ꕭ ꕮ or the NUMBER buttons to select a channel.
1

VOLUME ADJUSTMENT

1
Press VOL(+ or -) to adjust the volume.
2
If you wish to switch the sound off, press MUTE.
You can cancel this function by pressing MUTE or VOL(+ or -).
35