5. Use the Arrow buttons on the remote to highlight the input
source you wish to rename, then press MENU/OK.
6. Use the Arrow buttons to highlight Input Naming and press
MENU/OK.
The on-screen keyboard is displayed.
7. Use the Arrow and MENU/OK buttons to spell the custom
input name.
When you are finished, highlight OK and press MENU/OK.
8. Press EXIT.
Removing Unused Inputs from the Input List
To remove unused inputs:
1. Press the MENU button on the
remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the
remote to highlight the Input
icon and press MENU/OK.
3. Use the Arrow buttons to
highlight Input Naming and
press MENU/OK.
4. Use the Arrow buttons on the
remote to highlight the input
source you wish to remove,
then press MENU/OK.
5. Use the Arrow buttons to
highlight Skip Input and press
MENU/OK.
6. Press EXIT.
To restore an input to the list, go to the Input Naming screen
and select Reset.
SETTInG UP ChannElS
From the channel menu you can:
• Change the signal source
• Customize the master channel list
• Scan for new/additional channels
• Start a new channel scan
• Customize channel names
Changing the Signal Source
Using this option, you can change the signal source for the
coaxial (TV) input.
To change the signal source:
1. Press the MENU button on the
remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the
remote to highlight the TV icon
and press MENU/OK. The TV
Settings menu is displayed.
3. Use the Arrow buttons to
highlight Channels and press
MENU/OK.
4. Use the Arrow buttons to
highlight Signal Source.
5. Use the Arrow buttons to
change the setting to Cable or
Antenna.
6. Press EXIT.
28
5