Completing The First-Time Setup - Vizio E220MV User Manual

3
The first time you turn on the TV, the Setup App will guide you through each of the
steps necessary to get your TV ready for use.
Before you begin the first-time setup:
• Your TV should be installed and the power cord should be connected
to an electrical outlet.
• Have your remote ready. Ensure the batteries are inserted.
• Your devices should be connected.
To complete the first-time setup:
1. Turn the TV on by pressing the Power/
Standby button on the remote.
The Setup App is displayed.
Press the Right Arrow button on the
remote to go to the next screen.
2. Use the Up/Down Arrow buttons on
the remote to highlight your preferred
language, then press Right Arrow.
3. Use the Up/Down Arrow buttons on
the remote to highlight Home and
press Right Arrow.
6
Initial Setup Welcome
Allow the VIZIO setup Wizard to
help you tune your channels.
Next Exit
EXIT
Initial Setup Language
Please select your language: English
Español
Français
Back Select Next Exit
EXIT
Initial Setup
Mode Setting
Please select your input location: Home
Retail
Back Select Next Exit
EXIT

Completing the First-Time Setup

4. If the TV is connected to an external
antenna, select Antenna, then press
Right Arrow and go to step 5.
If the TV is connected to a cable
service without a set-top box (cable is
connected directly from the wall outlet)
select Cable, then press Right Arrow
and go to step 5.
If the TV is connected to a cable or
satellite set-top box, press the EXIT
button on the remote, then select the
input to which your set-top box is
connected (HDMI, COMP, or AV).
5. Use the Up/Down Arrow buttons on
the remote to highlight Scan, then
press Right Arrow.
The TV begins a channel scan.
6. Wait for the channel scan to finish.
7. When the channel scan is complete,
the Congratulations screen is
displayed.
The first-time setup is complete.
Initial Setup
Tuner
Please select your input source: Antenna
Cable
Back Select Next Exit
EXIT
Initial Setup Channel Scan
Please connect your cable or Scan
antenna to the DTV/TV input
Skip Scan
Back Select Next Exit
EXIT
Initial Setup Channel Scan
Channel Scan will take a few
minutes to complete.
Status: Scanning..
Analog Channels: 0
Digital Channels: 4
Exit
EXIT
Initial Setup Complete
Congratulations !!
Initial Setup completed
Back Next