Epson LQ 1050 - B/W Dot-matrix Printer Product Support Bulletin page 8

PSB NO.: P-0035
SUBJECT: LQ-850/950/1050 PRINTER QUESTIONS
Q:
How do I get the short tear off feature to work?
A:
The first step is to turn the dip switch 2-7 to the "ON"
position.
tear off.
of each page.
to the printer.
stop for a minimum of 3 seconds before the feature is acti-
vated.
Q:
When printing on single sheets,
lines.
Why?
A:
The number of printable lines on single sheets are 61 or 62.
Change the number of lines/page in your software package.
Q:
Where are the P-ROM and Character Generator ROM located on
the main board of the LQ-850/950/1050?
A:
The P-ROM is in location 9A.
is in location 6A.
Q:
What size buffer does the LQ-850/950/1050 have?
A:
6K bytes or OK bytes.
Q:
What are the printing speeds?
A:
The printing speeds are:
Pitch
Quality
10
10
12
12
Q:
What ribbons does the LQ-850/950/1050 take?
A:
Printer
LQ-850
LQ-950
LQ-1050
Q:
Does the LQ-850/950/1050 support color?
A: No.
EPSON AMERICA SERVICE, 23610 TELO AVENUE, TORRANCE, CALIF. 90505
P
RODUCT
DATE: 11/29/88
Then there are two ways to activate the short
The first way is to send a form feed at the end
The second way is to send 66 lines of data
In both instances data transmission must
This is selectable by dip switch 1-8.
Characters/Second
Draft
LQ
Draft
LQ
Standard Ribbon
#7753
#7767
#7754
S B
UPPORT ULLETIN
each page drops down several
The Character Generator ROM
220
73
264
88
Film Ribbon
#7768
#7769
#7770
PAGE: 1 of 3