A Hardware Tour; Busy Indicator - Pioneer DR-704S Operating Instructions Manual

A HARDWARE TOUR

Illustrations are provided in this chapter as a visual introduction to the Drive.
Please Familiarize yourself with these illustrations and refer to them when necessary
to complete the installation and operation of the unit.
FRONT VIEW
PHONES
6
1 Disc loading slot
Insert the CD-ROM with the label facing up.
When using 8 cm discs, attach a CD adapter (available at stores) to the disc, and
insert the disc into the disc loading slot.
2 Stop (7)/Eject (0) button
This button is used to eject the disc. When this button is pressed once during
playback of an audio disc, the playback will be stopped, and when it is pressed in
stopped condition, the disc will be ejected.
3 Play (3)/Skip (¢) button
This is used for direct playback of audio discs. When an audio disc is inserted and
this button is pressed, play status will be reached, and when this button is pressed
in play status, the playback will skip to the next track. Data discs will not be played
back.

4 BUSY indicator

This flashes during data access.
5 Volume Control (headphone level)
This is used to adjust the volume level of the headphone jack.
6 Headphone jack (PHONES)
This is a stereo minijack for headphones.
CD-ROM DRIVE
5
BUSY
3 2
4
1
Fig. 1
7
<DRC1085>
En