Viking RDDB301SS Installation Manual page 2

Please Read and ollow
W A R N I N G
Make sure that incoming voltage is the
same as unit rating. An electric rating
plate specifying voltage, hertz, and amps
is attached to the product. Wiring the
dishwasher with more voltage than it is
rated for may cause severe damage. To
reduce the risk of fire, electric shock, or
injury to persons, installation work and
electrical wiring must be done by qualified
technician in accordance with all
Plumbing connections must comply with
applicable codes and standards, including
applicable sanitary, safety and plumbing
fire-rated conditions.
codes.
W A R N I N G
Electrical power must be turned off at
The dishwasher door may not stay open
circuit breaker or fuse box before making
by itself until the door panel is installed.
electrical connections. Disconnect the
Be aware of this when fastening the
electrical power supply and place a tag at
dishwasher to the cabinet.
the disconnect switch indicating that you
are working on the circuit.
W A R N I N G
W A R N I N G