Viewcube - Autodesk 507B1-90A211-1301 - NavisWorks Manage 2010 User Manual

Predefined Camera Views
In Autodesk Navisworks, you can align a camera to one of the axis, or select one of six predefined face views to
instantly change the camera's position and orientation in the scene.
When you align the camera position along one of the axis:
Aligning with X axis toggles between front and back face views.
Aligning with Y axis toggles between left and right face views.
Aligning with Z axis toggles between top and bottom face views.
NOTE In previous versions of Autodesk Navisworks, the front face view was fixed and linked to the 'up' direction of
the current viewpoint by default. In Autodesk Navisworks Manage 2010 you can customize the location of the front
face by using the ViewCube. This change is global, and affects all viewpoints.
To align with X-axis
Click Align X
Menu: Viewpoint
To align with Y-axis
Click Align Y
Menu: Viewpoint
To align with Z-axis
Click Align Z
Menu: Viewpoint
To look from a preset face view
1 Click Viewpoint
2 Click one of the face views. Choose from:
Top
Bottom
Front
Back
Left
Right

ViewCube

®
Autodesk
use the ViewCube tool to adjust the viewpoint of your model.
Overview of the ViewCube
The ViewCube tool is a persistent, clickable, and draggable interface that you use to switch between views of
your model.
152 | Chapter 6 Explore Your Model
on the Navigation Tools toolbar.
Navigation Tools
on the Navigation Tools toolbar.
Navigation Tools
on the Navigation Tools toolbar.
Navigation Tools
Look From.
®
ViewCube navigation tool provides visual feedback of the current orientation of a model. You can
Align X
Align Y
Align Z