LG L1942PE-BS User Manual page 10

Control Panel Functions
Control
AUTO/SET
Button
Power Button
Power Indicator
Use these buttons to select or adjust functions in the
Buttons
On Screen Display.
For more information, refer to page A16.
Use this button to make D-Sub or DVI connector
active. This feature is used when two computers are
connected to the display. The default setting is D-Sub.
Use this button to select an icon in the On Screen
Display.
AUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press
the AUTO/SET button prior to entering the On
Screen Display(OSD). This will automatically adjust
your display image to the ideal settings for the
current screen resolution size (display mode).
The best display mode is:
17 inch: 1280x1024
19 inch: 1280x1024
Use this button to turn the display on or off.
This Indicator lights up as blue when the display is
operating normally(On Mode). If the display is in
Sleep Mode (Energy Saving), this indicator changes
to flicker.
Function
A9