Selecting the Options
ABC
If this Auto Brightness Control (ABC) feature is enabled, the system
will automatically adjust the display brightness signals based on
ambient room light.
FAIL OVER
Automatically detect the input connection and set its selection
priority.
If this feature is enabled (the AUTO DETECT is set to ON), you can
set the priority of the input source selection when there is more than
one input signal.
FACTORY
Return the display parameters on all menus to the factory default
RESET
settings.
OSD Menus
SETUP
AUTO DETECT
USER PRIORITY SETTING
PRIORITY 1
PRIORITY 2
PRIORITY 3
22
ON
VGA
HDMI
DVI