Sony HDR-CX190 "Handycam User Manual page 180

"Handycam" User Guide
Operation Search
Before use
Getting started
Recording
Playback
Saving images with an external
device
Customizing your camcorder
Troubleshooting
Maintenance and precautions
Contents list
Top page > Maintenance and precautions > Maintenance and precautions > About the "InfoLITHIUM"
About the "InfoLITHIUM" battery pack
Your camcorder operates only with an "InfoLITHIUM" V series battery packs.
"InfoLITHIUM" V series battery packs have the
What is an "InfoLITHIUM" battery pack?
An "InfoLITHIUM" battery pack is a lithium-ion battery pack that has functions for communicating
information related to operating conditions between your camcorder and an AC Adaptor/charger
(sold separately).
The "InfoLITHIUM" battery pack calculates the power consumption according to the operating
conditions of your camcorder, and displays the remaining battery time in minutes.
To charge the battery pack
Be sure to charge the battery pack before you start using your camcorder.
We recommend that you charge the battery pack in an ambient temperature range of 10 ˚C to 30 ˚C
(50 °F to 86 °F) until the CHG (charge) lamp turns off. If you charge the battery pack outside of this
temperature range, you may not be able to charge it efficiently.
To use the battery pack effectively
Battery pack performance decreases when the ambient temperature is 10 ˚C (50 °F) or below, and
the length of time you can use the battery pack becomes shorter. In that case, do one of the following
to use the battery pack for a longer time.
Put the battery pack in a pocket to warm it up, and install it on your camcorder right before you
start taking shots.
Use a large capacity battery pack: NP-FV70/NP-FV100 (sold separately).
Frequent use of the LCD screen or a frequent playback, fast forward or reverse operation wears out
the battery pack faster. We recommend using a large capacity battery pack: NP-FV70/NP-FV100
(sold separately).
Be sure to close the LCD screen when not recording or playing back on your camcorder. The battery
pack is also consumed when your camcorder is in recording standby or playback pause.
Have spare battery packs ready for 2 or 3 times the expected recording time, and make trial
recordings before making the actual recording.
Do not expose the battery pack to water. The battery pack is not water resistant.
About the remaining battery time indicator
When the power goes off even though the remaining battery time indicator indicates that the battery
pack has enough power to operate, charge the battery pack fully again. Remaining battery time will
be indicated correctly. Note, however, that the battery indication will not be restored if it is used in
high temperatures for a long time, or if left in a fully charged state, or when the battery pack is
frequently used. Use the remaining battery time indication as a rough guide only.
The mark that indicates low battery flashes even if there are still 20 minutes of battery time
remaining, depending on the operating conditions or ambient temperature.
About storage of the battery pack
If the battery pack is not used for a long time, fully charge the battery pack and use it up on your
camcorder once a year to maintain proper function. To store the battery pack, remove it from your
camcorder and put it in a dry, cool place.
To discharge the battery pack on your camcorder completely, select
General Settings] [Eco Mode]
180
mark.
[Off], and leave your camcorder in recording standby until the
Search Print
battery pack
[Setup] [