Wi-Fi Advanced Settings - Samsung Captivate Glide SGH-I927 User Manual

5. Tap Save to store the new information and connect to
your target WAP.
Note: The next time your device connects to a previously
accessed or secured wireless network, you are not
prompted to enter the WAP key again, unless you reset
your device back to its factory default settings.
Turning Wi-Fi Off
1. From the Home screen, tap
2. Tap the ON/OFF slider, located to the right of the Wi-Fi
field, to turn Wi-Fi OFF
Note: Use of wireless data connections such as Wi-Fi and
Bluetooth can cause an added drain to your battery and
reduce your use times.
Manually Scan for a Wi-Fi Network
1. From the Home screen, tap
2. Tap Scan.
All available Wi-Fi networks are displayed.
142
Settings.
.
Settings Wi-Fi.
Wi-Fi Status Indicators
The following icons show your Wi-Fi connection status at a
glance:
Displays when Wi-Fi is connected, active, and
communicating with a Wireless Access Point
(WAP).
Displays when Wi-Fi is active but there is a
communication issue with the target Wireless
Access Point (WAP).
Displays when connected to another device using
Wi-Fi Direct. For more information, refer to
Direct"
on page 143.

Wi-Fi Advanced Settings

The Wi-Fi settings - Advanced menu allows you to set
up many of your device's Wi-Fi service, including:
•
Setting your Wi-Fi sleep policy
•
Viewing your device's MAC Address
•
Configuring use of either a DHCP or Static IP
To access the Bluetooth Settings menu:
1. From the Home screen, tap
2. Tap Advanced.
"Wi-Fi
Settings Wi-Fi.