Tethering - Samsung SGH-T679 Galaxy Exhibit 4G User Manual

Activating the Device Name
1. Press
(Settings) Wireless and network
Bluetooth settings
assigned device name displays.
2. Press to erase the current device
name and enter a new name for this
device using the keyboard.
3. Tap OK to confirm your setting.
Activating Visibility
Press
(Settings) Wireless and network
Bluetooth settings
The phone is now activated for discovery
for 119 seconds so you can pair with
another device. After 119 seconds the
phone becomes undiscoverable again.
Scanning for Devices
This option allows you to scan for active
Bluetooth devices so you can pair with them.
1. Press
(Settings) Wireless and network
Bluetooth settings
Your phone begins scanning and lists any
discovered devices in the Bluetooth
devices section.
2. Tap a device name to pair with the device.
and then tap
Device name. The
and then tap
Visible.
and then tap
Search for devices.
Important! Some Bluetooth devices are secured
and require a PIN number to confirm
and pair with them.
3. Enter a PIN to pair with the device, if one is
required, and tap Accept or Decline.

Tethering

This option allows you to share your phone's
mobile data connection via a direct USB
connection between your phone and computer. A
wireless version of this same functionality would
be the Portable Wi-Fi Hotspot feature.
Note: You can not mount your phone's microSD
card to your computer while using the USB
tethering feature. If additional software or
USB drivers are required, navigate to:
www.samsung.com/us/support/downloads.
Press
(Settings) Wireless and network
Tethering and portable hotspot.
For more information, refer to "Tethering" on
page 176.
Portable Wi-Fi Hotspot
This feature allows you to turn your phone into a
Wi-Fi hotspot. The feature works best when used
in conjunction with HSPA+ (4G) data services
(although 3G service can also be used).
Changing Your Settings
http://
and then tap
185