Create Wireless Connection; Create Wired Connection - Philips NP1100/37B User Manual

Tip
•
After the first-time set-up, you can change the language,
date and time in the Settings menu.

Create wireless connection

1
Hold ready your network name and
network password or encryption key.
2
Follow the steps in chapter Set up the
player for the first time (see 'First-time
setup' on page 11) until the display shows
the network menu options [Search for
networks] or [SSID].
3
to select [Search for networks],
Press
then press .
4
Press to select [Wireless], then press
.
5
Press to select your home network
with wireless broadband Internet access,
then press .
• Enter encryption key (if required).
6
Select [Automatic] > (Enable Proxy?) [No
(default)].
The NP1100 displays a confirmation
»
screen that the settings are saved.

Create wired connection

1
Use an Ethernet cable (sold separately) to
connect the NP1100 to the router that
is connected to your home network with
broadband Internet access.
2
Ensure that the router is turned on.
3
Follow the steps in chapter Set up the
player for the first time (see 'First-time
setup' on page 11) until the display shows
the network menu options [Search for
networks] or [SSID].
4
to select [Search for networks],
Press
then press .
5
Press to select [Wired], then press .
6
Select [Automatic] (DHCP).
EN
12
7
Select (Enable Proxy?) [No (default)].
The NP1100 displays a confirmation
»
screen that the settings are saved.