Panasonic FV-11VFL3 Installation Instructions Manual page 8

INSTALLATION (JOIST MOUNTING- ) CONTINUED
8. Finish ceiling work. Ceiling hole should be aligned
with the edge of the flange. (Fig.6)
9. Insert the plug connector
into the receptacle
and secure the lighting unit to the fan unit with 2
screw (ST4.2X16) and 1 machine screw (M4X8).
(Fig.6)
10. Insert the fluorescent lamp and screw the night
lamp into the lighting unit. (Fig.6)
11. Insert mounting springs into slots as shown
and mount grille to fan body. (Fig.7)
INSTALLATION
1. Disconnect plug connector from receptacle and
remove adaptor from fan body before starting
installation.
2. Insert the suspension bracket into the adaptor and
secure it to joists by using long screws (ST4.2X20).
(Fig.8)
Ensure that distance B (7/8 inch, 21.6mm) for the
thickness of ceiling board.
If spacing A between joists is 21 1/4 to 23 1/ 2
inches, (540mm~597mm), connect suspension
bracket and
to page 6. Select the suspension bracket according
to spacing A as shown below.
Spacing A
13 1/4~15 1/ 2
between Joists
(336~394)
inches (mm)
suspension suspension
bracket bracket
3. Follow step 5 to 7 of the installation (page 7) to
complete the duct work and wiring.
8
and plug connector
and receptacle respectively,
(JOIST MOUNTING- )
(C4 mark to C4 mark) according
16 1/ 2~18 3/ 4 21 1/ 4~23 1/ 2
(419~480)
suspension suspension
bracket bracket
Machine screw
(M4X8)
Fluorescent lamp
Unit: inches (mm)
2 Long screws
(ST4.2X20)
2 Long screws
(ST4.2X20)
Suspension bracket
(540~597)
&
Unit: inches (mm)
Ceiling
Lighting unit
Screw
Plug connector
(ST4.2X16)
4 W Night Lamp
Receptacle
Lighting unit
Mounting spring
Slot
Grille
Adaptor
Joists
13 1/4~15 1/ 2(336~394)
16 1/ 2~18 3/ 4(419~480)
21 1/ 4~23 1/ 2(540~597)
A
B
7/8 (21.6)
Plug connector
Plug connector
Plug connector
Receptacle
Fig. 6
Ceiling
Fig. 7
Adaptor
Fig. 8