Picture Settings - Panasonic Viera TC-L47E5 Owner's Manual

●
"Reset to defaults" will be grayed out if no changes are made in the following menus:
"Picture", "PC adjustments", "Audio" and "Closed caption".

Picture settings

Settings Items
Reset to defaults
Picture mode Vivid
Standard
Cinema
Custom (Photo)
Game
Back light
Contrast, Brightness,
Color, Tint,
Sharpness
Color temp. Cool/Normal/Warm
Color mgmt. Off/On
A.I. picture Off/On
C.A.T.S. Off/On
Video NR Off/On
• Some menus are grayed out depending on the input signal or condition.
(e.g. "Zoom adjustments" will be grayed out if the aspect is not set to Zoom.)
Aspect Screen format
adjustments
HD size
H size
Zoom adjustments
PC adjustments Reset to defaults
Sync
Dot clock
H-position
V-position
Clock phase
Input
resolution
H-frequency
V-frequency
Adjust the image or picture quality
Item Description
Resets all picture adjustments to factory default settings except for "Advanced picture".
Provides enhanced picture contrast and sharpness for viewing in a well-lit room.
Recommended for normal viewing conditions with subdued room lighting.
For watching movies in a darkened room. It provides a soft, film-like picture.
Customizes each item according to your taste.
Photo is displayed in JPEG menu.
For playing video games.
Adjusts the luminance of the back light.
Adjusts the color, brightness, etc. for each picture mode to suit your taste
• Display range
Contrast/Brightness/Color/Sharpness
Tint
Selects a choice of Cool (blue), Normal, or Warm (red) color.
On: Enhances green and blue color reproduction, especially outdoor scenes.
Controls dark areas without affecting the black level or brightness in the overall picture.
Automatically adjusts the screen brightness according to the ambient lighting condition.
Reduces noise, commonly called snow. Leave it off when receiving a strong signal.
FULL/H-FILL/
Changes the format (aspect ratio).
JUST/4:3/ZOOM Lets you choose the aspect depending on the format of
received signal. (p. 55)
Size 1/Size 2
Selects between 95 % (Size 1) or 100 % (Size 2) for the scanning
area with High-definition signal.
Select "Size 1" if noise is generated on the edges of the screen.
●
Size 1: Selected item for "HD size". Scanning 95 %
●
Size 2: Selected item for "HD size". Scanning 100 %
Size 1/Size 2
Adjusts the horizontal display range to reduce noise of both side
edges of an image.
Size 2: Adjusts the image size according to the aspect mode to
reduce noise. (p. 55)
Adjusts vertical alignment and size when aspect setting is "ZOOM".
Resets PC adjustments.
H & V
The H and V sync signals are input from the HD/VD connector. (p. 58)
On green
Uses a synchronized signal on the Video G signal, which is
input from the G connector. (p. 58)
Alleviates the problem if a picture appears to be vertically-striped, flickers partially or is blurred.
Adjusts the horizontal position.
Adjusts the vertical position.
Alleviates the problem if the whole picture appears to flicker or is blurred.
First adjust the Dot Clock to get the best possible picture, then adjust the clock Phase
so that a clear picture appears.
●
It may not be possible to display a clear picture due to poor input signals.
Switches to wide display.
●
VGA (640×480 pixels), WVGA (852×480 pixels), XGA (1,024×768 pixels),
WXGA (1,280×768 pixels)
●
Options change depending on signals
Displays the H (Horizontal)/V (Vertical) frequencies.
Display range
Horizontal: 15 - 110 kHz
Vertical: 48 - 120 Hz
: 0 - 100
: -50 - +50
OK
OK
49