First Time Setup - Panasonic Viera TC-L47WT50 Quick Setup Manual

First Time Setup

The first time setup screen is displayed only when the TV is turned on for the first time, after the power cord
is inserted into a wall outlet and the "Auto power on" is set to "No".
(Press MENU -- > Setup -- > Advanced setup -- >Auto power on)
or
Turn the TV on with the POWER button
(TV) (Remote)
or
Setup the following items
●
Select your language
●
Select your country
●
Select your viewing mode (Be sure to select "Home Use")
If you select "Store Demonstration" by mistake, confirmation screen will be displayed.
To display the "Set viewing mode" screen again and select "Home Use", do one of
the following:
• Press and hold down the rear POWER button for at least five seconds.
• Unplug power cord for 30 seconds and plug in again.
●
ANT/Cable setup
Select and set the settings according to your ANT/Cable environment.
Select "Yes" on the confirmation screen, to start the scanning process.
After scanning is finished completely, press OK to continue.
●
Label the inputs for easy identification
To name each input, follow the instructions on screen.
When this is done, select NEXT and press OK to go to the next step.
●
Configure Network settings
Select the Network type and select the setting mode.
If you select "Wireless (WiFi)", start "Wireless network settings".
Select "Automatic" or set "Manual" setting, start connection test.
When you complete "Network settings" successfully, the completion screen will be displayed.
●
Adjust the Clock
Select the clock mode and set other settings.
When "Auto" is selected, clock will be set automatically according to Time zone and DST.
●
Pair the Touch Pad Controller
To pair the Touch Pad Controller, hold the touch pad within 1.6 feet (50 cm) of the
TV and simultaneously press and hold the Right button and INTERNET button on
the Touch Pad Controller following the instructions on screen.
Then, follow the instructions on screen to complete the pairing.
When you complete this setting successfully, the completion message will be displayed.
It also displays some operation methods such as Tap, Swipe and Trace the fringe
to scroll, etc.
Tap (or press OK) to continue to next step.
• To repeat these settings: Setup -> VIERA Touch Pad settings
Complete First time setup
Completion screen is displayed.
You can repeat the First time setup
• Press MENU -- > Setup -- > First time setup
To watch TV via a Cable box, Satellite receiver, or any other source (DVD, DVR,
gaming device, etc.), press the INPUT button and select the appropriate input.
Panasonic does not guarantee operation and performance of peripheral devices
made by other manufacturers; and we disclaim any liability or damage arising from
operation and/or performance from usage of such other maker's peripheral devices.
17