Panasonic TC-P65VT50 Ehelp page 204

Support / FAQ
FAQ
3D - Format
Questions
When selecting some 3D
Video content, why are there
two pictures next to each
other?
Why does the left and right
Sides of the image seem
reversed?
Answers
There are a few different 3D formats and the
current setting may not match the incoming 3D signal.
The format should change automatically, but
depending on the source/connection it may not signal
the TV properly. To manually select other 3D formats:
1. Press 3D button directly or press VIERA
TOOLS
button on the TV's remote control and select 3D
3D format select
2. In the
Side by side
3D format such as
bottom.
3. Remember to switch the 3D format setting back to
2D
when you go back to viewing a standard 2D
signal.
The 3D format has two different "phases". Try the
other phase:
1. In the main menu, select Setup. Highlight
settings
and press
3D settings
2. In the
swap.
204
menu, choose another
Top and
or
.
Left/Right
menu, select
3D