Tub Clean; Door Lock & Detecting - LG F1481TD Owner's Manual

Front loading washing machine
Table of Contents

Advertisement

How to use washer

Tub Clean

Tub Clean is special cycle to clean the inside of the washing machine.
A higher water level is used in this cycle at higher spin speed. Perform this cycle regularly.
NOTE
• Do not add any detergent to the detergent compartments.
• Excessive suds may generate and leak from the washer.
CAUTION
• If there is a child, be careful not to leave the door open for too long.
Door Lock & Detecting
B
A
1. Remove any clothing or items from the
washer and close the door.
2. Open the dispenser drawer and add
Anti limescale (e.g. Calgon) to the Main
wash compartment.
3. Close the dispenser drawer slowly.
4. Power On and then press and hold Rinse
and Spin button for 3 seconds. then "
will be displayed on the LED display.
5. Press the Start/Pause button to start.
6. After the cycle is complete, leave the door
open to allow the washer door opening,
flexible gasket and door glass to dry.
"Door Lock" - For safety reasons, the
door will lock while machine is in use and the
"Door Lock" icon will light up. You can safely
open the door after the "Door Lock" icon
turns off.
"Detecting" icon will light up, when
washing machining rotates slowly and
detects how much laundry is loaded in the
drum.
It will take a short time.
"
25

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents