System Setting; Auto Set Up - LG HR929M Owner's Manual

26

System Setting

Auto Set UP

You can reset the recorder to all its factory settings.
Some options cannot be reset (Rating and
Password). The [Auto Setup] menu appears on the
screen after the factory settings.
Step 1. Language Setting
1. Use W/S/A/D to select a language for the
on-screen display, and press ENTER (b).
3
Step 2. Channel Setting
1. Input the new password using numerical
buttons. Enter it again to verify.
2. While the Start option is selected, and press
ENTER (b) to begin the channel search.
If you want to search channels in numerical
order, uncheck the box [Automatic Numbering]
by using ENTER (b)
.
The recorder automatically searches for and
saves the programmes.
If you select [Stop], the [Channel Setting]
function will be skipped.
3. Press ENTER (b).
Step 3. Time Setting
1. Use A/D to select an option among [Manual]
or [Auto], and press ENTER (b).
Auto: Set the programme that broadcasts
a clock signal and the clock will be set
automatically.
If the time that has automatically set is not
correct comparing your local time, you can set
additional time option.
Manual: If there is no channel that broadcasts
a clock signal in your area, you can set the time
and date manyally. Use W/S to select each
field, and input correct time and date using A/
D. You can use numerical buttons.
2. Press ENTER (b) to complete the time setting.
Step 4. Network Setting
1. Refer to "Wired network connection" on pages
20-21 to complete the [Wired] setup option,
and press ENTER (b).
Select [No] and press ENTER (b) to cancel.
2. Refer to "Wireless network connection" on pages
22-24 to complete the [Wireless] option, and
press ENTER (b).
Select [Cancel] and press ENTER (b) to cancel.
This recorder can apply only one network setup
between [Wired] and [Wireless]. If you already
set the [Wired] at step 6, you do not need to set
[Wireless] setting.