Table of Contents
Advertisement
4. Click the Calibration button, or press the measure button at
the top of the calibrator to measure the color.
Note:
Do not measure the sheet under strong light or direct daylight;
otherwise the measurement may be inaccurate.
5. Repeat steps 2 and 3 until every block of the calibration sheet
is measured, then click Save File.
Note:
You can't save the file until every block is measured.
6. Name the file and select a folder, then click Save.
You can now use this file to implement your profile. See the next
section for instructions.
Calibrating Your Printing System
3
3-9
Advertisement
Table of Contents
