Electrolux EIFLW50LIW Use And Care Manual page 10

Operating Instructions
10
OPERATING YOUR WASHER, continued
6. Select the appropriate cycle and
settings for the load.
• Turn the cycle selector knob in either direc-
tion to select the cycle desired. The indica-
tor for that cycle will be illuminated. See the
"Cycle Selection" section in this guide for
descriptions of each cycle.
• The estimated cycle time, suitable wash
and rinse water temperatures, fi nal spin
speed, soil level, and options for each cycle
will be indicated for the cycle selected. See
the "Cycle Settings" and "Washer Settings
Chart" in this guide for descriptions and
available settings for each cycle.
• To change the settings, press the Tempera-
ture, Spin Speed, Soil, and Options but-
tons to scroll to the desired settings.
• To select or delete an option, press the button
for that option. The indicator will light when
the option has been selected. It will no longer
be lighted when the option has been deleted.
NOTE
To provide the best care for your laundry, not
every setting or option is available with every
cycle. If a setting or option is not available for the
cycle selected, the indicator will not light.
• Adjustments to a cycle will be remembered
and recalled each time that cycle is selected
in the future.
To return to factory settings,
press these two buttons at the
same time and hold until the
signal sounds.
7. Start the washer.
• Close the door and press start. The washer
will not operate with the door open and
DOOR OPEN
• Select delay start to delay the beginning of
the cycle if desired.
• As a safety measure, the door will automati-
cally lock during the entire wash cycle.
will be displayed.
• To add a forgotten item to the washer any
time during the wash portion of the cycle,
press pause. When the door unlocks, open
the door, add the item, close the door and
press start to resume the cycle.
• If changes to the settings or options are at-
tempted after the cycle starts, you will hear
several beeps when the buttons are pressed.
To change the settings or options, press
pause, make the new selections and press
start again.
• To change the cycle once the cycle has
begun, press cancel, select a new cycle,
and press start again. Just turning the cycle
selector knob will not change the cycle.
• To stop the cycle, press cancel.
NOTE
If the cycle is interrupted during spin, the door
lock will not release until the tub has stopped
spinning. DO NOT force open the door.
• A signal will sound at the end of the cycle if
the chime option has been selected.
• Remove items from the washer when the
cycle ends and place in dryer, line dry or dry
fl at as directed on the fabric care label.
For best results
Follow the fabric care label instructions
on items to be washed.
• Excess wrinkling, color transfer or odors may
develop in items left in the washer after the
cycle has ended, if not removed promptly.
CAUTION
ENTRAPMENT and TIP-OVER HAZARD
An open door could entice children to hang on
the door or crawl inside the washer. If there are
no small children present, you may leave the
door ajar to prevent mildew and odor build up.