Dynex 2300-0247 Installation Manual

Driver installation for Windows XP

1. Once you have completed the hardware installation, switch
on your computer and put the CD into the CD-ROM. The
wizard searches for new hardware. Select Install from a list
or specific location (Advanced). Click Next.
2. Select Search for the best driver in these locations and
Include this location in the search: (Please click Browse
to search for driver files and open it, e.g., D:\driver\WinXP)
and click Next.
3. Click Continue Anyway.
4. Click Finish.
Note: Windows will notify you that the driver has not passed
Windows Logo testing. This is normal, and it has been
verified that the Adapter does work with Windows XP.
Click Continue Anyway.

FCC Certifications

This device complies with Part 15 of the FCC rules. Operation
is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2)
This device must accept any interference received, including
interference that may cause undesired operation.

CE Mark Warning

This is a Class B product. In a domestic environment, this
product may cause radio interference.
5
P/N: 2300-0247
7

Part 3. Modem Dialing Location

In Windows 98SE/ME/2000/XP, Click Start Settings
Control Panel HSF Modem Region Select
Select a region Click OK.
Installation Guide
56K USB Modem
Model No.: DX-M300
www.dynexproducts.com
6