Using Your Tv; Turning The Tv On And Off; Changing Channels; Adjusting The Volume - Dynex DX-PDP42-09 User Manual

Using your TV

Connecting an audio receiver or Dolby Digital 5.1
sound system
You can connect your TV's audio to a digital amplifier or home theater
system.
Back of
TV
HDMI 1 IN HDMI 1 IN
HDMI 2 IN HDMI 2 IN
L L
PC IN PC IN
VGA VGA
S S S V - V - D I D I E E O O 1 1 N I N I
L L R R
Y/C Y/C
L L R R
Audio cable
Audio amplifier or
receiver
To connect to an audio receiver or Dolby Digital 5.1 sound system:
1 Plug RCA audio cables into the OUTPUT AUDIO L (white) and
AUDIO R (red) jacks on the back of your TV, then into the AUDIO
L (white) and AUDIO R (red) input jacks on the audio receiver.
- OR -
Plug an optical cable into the DIGITAL AUDIO OUTPUT jack on
the back of your TV, then into to optical input jack on your Dolby
Digital 5.1 sound system.
2 Press to turn on your TV.
Arranging the cables
After connecting the cables, bundle the cables using the cable guide as
shown.
OUTPUT
VIDEO DIGITAL-AUDIO
R R
L L R R L R
Y Y Y P P b b P P 1 r 1 r N I N I
Pb Pb Pr Pr L L R R
Y Y
Y Y
Pb Pb Pr Pr L L R R
Y Y P P b b P P 2 r 2 r N I N I
Optical cable
Cable guide
Using the swivel base
The viewing angle of your TV may be adjusted approximately 60° to the
left or right as shown.
Using your TV

Turning the TV on and off

To turn your TV on and off:
1 Press (power) on the TV or remote control. The
POWER/STANDBY indicator turns blue and your TV turns on.
2 To turn off your TV, press
mode and the Power/Standby indicator turns red.
If you are going to be away for an extended time, disconnect the
power cord from the power outlet.

Changing channels

To change channels:
• Press CH + or CH - on the front of your TV or on the remote
control.
To enter a channel number directly:
• Press the number buttons on the remote control.
In digital TV mode, a main (major) channel can have one or more
sub (minor) channels. Press the number buttons to enter the
main channel, press the • button (to the left of the 0 button),
then press the number button for the sub-channel. For example,
if you want to watch channel 5.2, press 5, press the • button, then
press 2.
To select a channel from the channel list:
1 Press CH-LIST. The channel list displays on the screen.
2 Press or to select the channel you want, then press
ENTER to go to that channel.
To go to the previous channel:
• Press RECALL.

Adjusting the volume

You can adjust the volume using the controls on your TV' s side panel or
the remote control.
To adjust the volume:
1 Press VOL+ or VOL- to increase or decrease the volume.
2 Press MUTE to mute the sound. To restore the sound, press this
button again, or the VOL+ or VOL-.

Selecting the video source

To select the video source for your TV:
1 Press INPUT to display the Input Source List.
2 Press or to select the source you want (initially select TV),
then press ENTER.
13
(power). The TV goes to Standby