Accessing The Default Settings; Care And Cleaning; Hob; Hob Frame - Bosch PIA611T16E Installation Instructions Installation Instructions Manual

Accessing the default settings

The hob must be turned off.
Switch on the hob.
1.
In the following 10 seconds, press and hold the
2.
for 4 seconds.
appears on the left of the screen and
™‚
Press the symbol several times until the indicator for the
@
3.
required function appears.

Care and cleaning

The advice and warnings contained in this section aim to guide
you in cleaning and maintaining the hob, so that it is kept in the
best possible condition

Hob

Cleaning
Clean the hob after each use. This prevents food remains left
on the surface from burning. Wait until the hob is cold enough
before attempting to clean it.
Only use cleaning products specifically designed for glass-
ceramic hobs. Follow the instructions provided on the
packaging.
Do not use:
Abrasive products
■
heavy-duty cleaners, like oven sprays and stain removers
■
Pads that may scratch
■
High-pressure or steam cleaners
■
Then choose the required setting using the + and - symbols.
4.
symbol
@
Push the
5.
4 seconds.
The settings have been properly saved.
Quit
To leave the basic settings, turn off the hob at the main switch.
on the right .
‹
Glass scraper
Remove dried-on food remains using a glass scraper.
Release the scraper safety catch
1.
Use the blade to clean the hob surface
2.
Do not attempt to clean the hob surface with the base of the
scraper. This could result in scratching.
ã=
The blade is extremely sharp. Risk of cuts. Protect the blade
when not in use. Replace the blade immediately when any
imperfections are found.
Care of the appliance
Apply an additive to protect and preserve the hob. Follow the
advice and warnings provided with the product.

Hob frame

In order to avoid damage to the hob frame, follow the
indications below:
Use only slightly soapy hot water
■
Do not use sharp or abrasive products
■
Do not use a glass scraper
■
@ symbol again and hold it for longer than
Risk of injury!!
15