2.6
Jumpers
DRAM Bus / QPI DRAM overvoltage setting
(3-pin OV_DRAM_BUS, 3-pin OV_QPI_DRAM)
These jumpers allow you to enable or disable the advanced DRAM Bus, and QPI DRAM
overvoltage settings in BIOS. Read the following information before you change the jumper
settings.
Pins 1-2 (Default)
Pins 2-3 (OV Enabled)
•
Before you change the jumper settings for extra-high overvoltage ability, use the BIOS
items first to adjust the desired DRAM, and QPI performance. Ensure that your system
functions well under the highest BIOS voltage settings before you change the setting
of these three jumpers.
•
The system may need a better cooling system (for example, a water-cooling system)
to work stably under high voltage settings.
2-22
OV_DRAM_BUS
OV_QPI_DRAM
up to 2.00V
up to 1.70V
up to 2.46V
up to 1.90V
Chapter 2: Hardware information