Table of Contents
Advertisement
. Launch your web browser. The QIS web page appears automatically and starts
detecting your connection type, VPI/VCI value and encapsulation mode.
Note: If the QIS web page does not appear after you launched your web browser, disable the
proxy settings on your web browser.
. Key in the user name and password. Click Apply.
If the QIS cannot detect your Internet connection type, click Manual Setting
and set up the Internet connection manually.
Note:
• The PPPoE Internet connection type is used in this setup case. The setup screen varies with
different Internet connection types.
• Obtain the required information such as the user name and password from your Internet
Service Provider (ISP).
1
DSL-N10
Chapter : Setting up the hardware
Hide quick links:
Advertisement
Table of Contents
