Asus P8B-M Series User Manual page 42

4. LAN controller setting (3-pin LAN_SW1, LAN_SW2)
These jumpers allow you to enable or disable the onboard Intel
Gigabit LAN controllers. Set to pins 1-2 to activate the Gigabit LAN feature.
5. RAID configuration utility selection (3-pin RAID_SEL1)
This jumper allows you to select the RAID configuration utility to use when
you create disk arrays. Place the jumper caps over pins 1–2 if you want to
use the LSI Logic Embedded SATA RAID Setup Utility (default); otherwise,
place the jumper caps to pins 2–3 to use the Intel
2-24
82574L
®
Rapid Storage Technology.
®
Chapter 2: Hardware information