radio sends a "channel/talkgroup request" to
the home repeater. The system then sends
back a "channel/talkgroup grant" to the user's
radio. The channel/talkgroup grant message
contains the number of a "go to" repeater to tell
the radio which repeater to use. This "go to"
repeater can be the same as the radio's home
repeater or another repeater in the system.
The radio uses the "go to" repeater for
transmission. Once the transmission has
ended, this repeater is available for other
users.
PR400 RADIO FEATURES
Radio-Wide Features
•
64 Conventional Channels
•
Up to 10 Sites and 100 Talkgroups
•
Up to 20 Repeaters per Site
•
8-Character Alphanumeric Display
•
4 Programmable Feature Buttons
•
2 Memory Channels
•
Telephone Interconnect
•
User-programmable Phone, Scan, and TPL/
DPL Lists
•
Option Board Expandability
•
Busy Channel Lockout
•
High/Low Power Settings
8
English
•
Transmit Time-Out Timer
•
Monitor and Sticky Permanent Monitor
•
System Scan with 2 Priority Levels and Revert
Scan
LTR Trunked Features
•
MDC 1200 Signaling
- Selective Radio
- MDC Pre-Time
Inhibit Decode
- PTT ID Encode/
- Radio Check
Decode
- DOS
Conventional Signaling Features
•
MDC 1200 Signaling
- Selective Radio
- PTT ID Encode/
Inhibit Decode
•
Quik-Call II Signaling
- Call Alert
- Radio Call List
Encode/Decode
- Call Tone
- Selective Call
Encode/Decode
Decode
Decode
Tagging