Connecting Keypad Light Wires; Warnings And Precautions - Elite Entry Phone Dial Code Owner's Manual

IF YOU ARE USING THE PHONE'S OWN TRANSFORMER FOR POWER:
STEP 1 Unplug the transformer.
STEP 2 Connect the black and white wire on the light in parallel
with the black and white wires on the phone.
STEP 3 Stow the wires in the bottom of the box neatly.
STEP 4 Plug in the transformer. Test the phone for normal function.
All five lights in the hood should be lit.
IF YOU ARE USING A SECOND TRANSFORMER TO POWER THE LIGHT:
(Time clock or existing security lights)
STEP 1 Run your wires to a place to plug in the 12V transformer.
STEP 2 Wire the black & white wires to the 12V (AC or DC)
transformer per all local codes & standards.
STEP 3 Plug in the transformer. Test the phone for normal function.
All five lights in the hood should light with the power on.
A
PAGE
16

CONNECTING KEYPAD LIGHT WIRES

WARNINGS AND PRECAUTIONS

A. The Entry Phone is only water resistant when the Stainless Steel
Door is closed and locked. Do not expose the Processor Unit or the
open Processor Containment Box to rain, snow, or harsh weather
conditions. Do not drop the Processor or expose it to impact.
B. Do not touch the terminals. Do not bend, drop or expose to impact.
B