RocketFish ND-GWII1125 Quick Setup Manual

V1
FINAL
FOR PRINT
Wii TM Controllers Sensor

Package contents

• Wireless sensor bar for Nintendo® Wii
• Quick Setup Guide

You will need:

• 4 AAA batteries

Features

• Receives wireless (IR) signals from wireless Wii controllers
• Extendable sensors for a wider range of play
• Sleep mode and low power indicators
• Mount on top or bottom of TV or on the wall

Front view

Sleep mode
indicators
Low battery
indicator
Extendable
sensors
STATUS

Back view

Optional wall
mounting slots
Battery
compartments
ND-GWII1125
ND-GWII1125_10-0884_QSG_V1_EN.indd 1 ND-GWII1125_10-0884_QSG_V1_EN.indd 1
TM
Sleep mode
selector
Extendable
sensors
1 HOUR 2 HOUR
SET
SLEEP MODE
QUICK SETUP GUIDE

Setting up your sensor

1 Remove the covers from the battery compartments on the back of the
sensor bar.
2 Insert 2 AAA batteries into each battery compartment, then replace the
covers. Make sure that the + and – symbols on the batteries line up with
the + and – symbols in the battery compartment.
3 Mount the bar on the top (A) or the bottom (B) of the TV using the
pre-attached sticker or optionally on the wall using the mounting slots
over 1/4" mounting screws (not included) 48 mm apart (center to center).
4 Set the sensor location information in your Wii settings menu.
For instructions, see your Wii's user guide.
9/1/2010 11:49:37 AM 9/1/2010 11:49:37 AM