You can choose to print your labels in many different sizes and styles. The labelmaker uses DYMO D1 label cassettes in widths of 3/8” (9 mm ) and 1/2” (12 mm). Label cassettes are also available in a wide range of colors.
CLICK! Figure 4 4. Press firmly until cassette clicks into place. 5. Close the label cassette cover and press turn on the power. Selecting a Language You can select from a number of different language options. By default, the language is set to English. The language option you choose determines the default units of measure (inches or millimeters) and the character set that is available.
CAPS Mode key toggles capitalization on and off. When CAPS mode is turned on, the CAPS mode indicator is shown on the display and all letters that you enter will be capitalized. The default setting is CAPS mode on. When CAPS mode is off, all letters entered appear in lower case.
2. Use the arrow keys to select a style and then press Adding Box and Underline Styles You can further highlight your text by choosing a box or underline style. DYMO Underline Square Box DYMO Pointed Box DYMO Rounded Box...
Adding Symbols The labelmaker supports the extended symbol set as shown in Figure 9. To add a symbol 1. Press . The first row of symbols shown in Symbols the table appears in the display. 2. Use the arrow keys to move to the desired symbol.
Previewing Your Label You can preview the text or format of your label prior to printing. A two-line label is previewed as a single-line label. To preview your label 1. Press 2. Select Preview and press 3. Select Text or Format and press If you select Text, the text of the label scrolls across the display.
Recalling Stored Labels and Formats You can easily recall labels and formats stored in memory to use at a later time. To recall labels or formats 1. Press 2. Select Recall and then Label, Format, or Last Printed. The first memory location is displayed similar to storing a label or format.
Fixed-length label selected and the length necessary to print the label exceeds the selected length. If you still need assistance, contact DYMO Customer Support. Refer to of this User Guide to locate the contact number for your country. Documentation Feedback We are constantly working to produce the highest quality documentation for our products.
Page 11
Emissions – EN 61000-6-3: Electromagnetic Compatibility (EMC) - Part 6: Generic Standards - Section 3: Emission standard for residential, commercial and light industrial environments. Esselte is an ISO 14001 registered company. Plastic components of this printer have been marked to enable final disposal in a manner that is sensitive to the environment.
Contacting Customer Support The following table provides a list of telephone numbers to reach DYMO Sales and Support departments. You can also reach DYMO at www.dymo.com. Country Australia Austria Belgium Canada Czech Republic Denmark Finland France Germany Hong Kong Hungary...
Page 14
No part of this document may be reproduced or transmitted in any form or by any means or translated into another language without the prior written consent of DYMO Corporation. ExecuLabel is a trademark of DYMO Corporation. DYMO is a registered trademark of Esselte Corporation. All other trademarks are the property of their respective holders.