Advertisement
STEP-2
CONNECT
connecting the Key Chain to your computer, the Key Chain will prompt you to set the
device to "USB Charge or USB Update". Select USB Update by pressing the Right
button and then the Middle button.
STEP-3
RUN
the Photo Viewer icon located on your desktop. Once the Photo Viewer opens, it will
give you a message indicating "Upload Completed". Click OK. (This message
indicated that the Photo Viewer Software has made connection with the Key Chain). If
you have received the "Upload Completed" Message, Skip STEP-4 and continue with
STEP-5
STEP-4
If you have NOT received the "Upload Completed" message, then you are
encountering the below error message:
Can't Find any Photo Viewer, or
another program owns it. The
program will exit!
STEP-5
LOCATE
STEP-6
HIGHLIGHT
Diagram)
STEP-7
SEND
STEP-8
TRANSFER
Disconnect the Key Chain from your computer. Done!
the Key Chain to your computer using the supplied USB cable. Upon
the Photo Viewer Software to transfer photos to the Key Chain. Double-click on
*Set the Photo Key Chain to USB update. SEE "STEP- 2".
*Make sure the USB Cable is connected properly, you should hear a "clicking"
sound when the USB Cable is connected properly in the USB Port.
*The Key Chain should also appear under "MY COMPUTER" as a removable
disk. If not, switch the USB Port or replace the USB Cable.
the images on your computer (See Diagram)
the images files that will be transferred to the Key Chain (See
the highlighted images to the Device Panel (See Diagram)
the images from the Collection panel to the Key Chain (See Diagram)
Advertisement
