Table of Contents
Advertisement
2.
Color
You can adjust Brightness,
Contrast, Saturation, Color Temp.,
Skin Tone, and Smart View from
this menu.
•
Brightness: the adjusting
range is from 0 to 100.
is a hotkey to activate this
function.
•
Contrast: the adjusting range is from 0 to 100.
•
Saturation: the adjusting range is from 0 to 100.
•
Color Temp.: contains four modes including Cool, Normal, Warm, and
User Mode.
•
Skin Tone: contains three color modes including Reddish, Natural, and
Yellowish.
•
Smart View: provides better display quality under big viewing angle.
In the User mode, colors of R (Red), G (Green), and B (Blue) are user-
configurable; the adjusting range is from 0-100.
3.
Image
You can adjust Sharpness, Trace
Free, Aspect Control, ASCR,
Position (VGA only), and Focus
(VGA only) from this menu.
•
Sharpness: the adjusting
range is from 0 to 100.
•
Aspect Control: adjusts the
aspect ratio to "Full", or "4:3".
•
ASCR: turns on/off the ASCR (ASUS Smart Contrast Ratio) function.
•
Position: adjusts the horizontal position (H-Position) and the vertical
position (V-Position) of the image. The adjusting range is from 0 to 100.
•
Focus: reduces Horizonal-line noise and Vertical-line noise of the image
by adjusting (Phase) and (Clock) separately. The adjusting range is from
0 to 100.
•
Phase adjusts the phase of the pixel clock signal. With a wrong phase
adjustment, the screen shows horizontal disturbances.
•
Clock (pixel frequency) controls the number of pixels scanned by one
horizontal sweep. If the frequency is not correct, the screen shows vertical
stripes and the image is not proportional.
3-2
Chapter 3: General Instructions
Advertisement
Table of Contents
