Gigabyte GV-N62128DP2-RH User Manual page 20

nView Display Settings properties
Display Model GV-N62128DP2-RH
Matrix CRT+TV
CRT+DVI
DVI+TV
Dual-Monitor Setup:
You can set the display to output from two monitors on the nView Display Settings page.
The GV-N62128DP2-RH support the following modes.
(1) Clone Mode:
Clone mode indicates that both displays in the
display pair show images of the same desktop.
Select Clone from the nView Display Mode list
and click Apply.
(2)DualView Mode:
Dualview mode indicates that both displays in the
display pair function as one virtual desktop. Unlike
Horizontal Span or Vertical Span mode, Dualview
treats each display as a separate device. This
means that the taskbar will not be stretched across
displays and 3D applications are not accelerated
as efficiently as when the application spans
displays.
Select DualView from the nView Display Mode
list and click Apply.
GV-N62128DP2-RH Graphics Accelerator
nView allows you to connect separate displays to single
graphics card.
• nView Display mode: select your preferred nView display
modes here. Options: Single display/ Dualview
• Primary/Secondary display: select a single display or
display pair. The selected display combination will appear
in the graphical representation below.
• Make this the primary display: Specifies that the display
corresponding to the icon you selected above is the
primary display.
• Click Apply to apply settings or click OK to save settings.
If TV is chosen as the display, you will need to select
Yes
the proper TV format. To do this, click "Device Setting"
No
Yes followed by "Select TV format". Select the format for your
television and then click "Apply" followed by "OK".
- 20 -
Clone Mode
DualView Mode