D-Link DWA-160 - Xtreme N Duo Dual Band Draft 802.11n USB Adapter User Manual page 42

Section  - Troubleshooting
2. The computer does not recognize the DWA-160 Wireless Adapter.
Make sure that the DWA-160 Wireless Adapter is properly seated in the computer's USB port.
If Windows does not detect the hardware upon insertion of the adapter, make sure to completely remove drivers that
®
were previously loaded.
3. The computer with the DWA-160 installed is unable to connect to the wireless network and/or the Internet.
• Check that the LED indicators for the broadband modem are indicating normal activity. If not, there may
be a problem with the broadband connection.
• Check that the LED indicators on the wireless router are functioning properly. If not, check that the AC
power and Ethernet cables are firmly connected.
• Check that the IP Address, subnet mask, gateway, and DNS settings are correctly entered for the
network
• In Infrastructure mode, make sure the same Service Set Identifier (SSID) is specified on the settings for
the wireless clients and access points. By default, the SSID factory setting for D-Link products is blank.
(Double-click on the WLAN icon in the taskbar. The Link Info screen will display the SSID setting.)
D-Link DWA-160 User Manual