Figure 5-36: Editing Profiles - Wireless Security - Leap; Figure 5-37: Editing Profiles - Network Settings - Linksys WPC4400N User Manual

Wireless-N Business Notebook Adapter
LEAP
Lightweight Extensible Authentication Protocol is a mutual authentication method that uses a username and
password based system.
Enter the username and password in the username and password field accordingly. Enter the password again
in the confirm filed.
4. The Network Settings screen from the Wireless Network Monitor will appear. If your network has a router or
other DHCP server, click the radio button next to Obtain network settings automatically (DHCP).
If your network does not have a DHCP server, click the radio button next to Specify network settings. Enter
an IP Address, Subnet Mask, Default Gateway, and DNS addresses appropriate for your network. You must
specify the IP Address and Subnet Mask on this screen. If you are unsure about the Default Gateway and DNS
addresses, leave these fields empty.
IP Address - This IP Address must be unique to your network.
Subnet Mask - The Adapter's Subnet Mask must be the same as your wired network's Subnet Mask.
Default Gateway - Enter the IP address of your network's Gateway here.
DNS 1 and DNS 2 - Enter the DNS address of your wired Ethernet network here.
Click the Next button to continue, or click the Back button to return to the previous screen.
Chapter 5: Using the Wireless Network Monitor
Editing a Profile
Figure 5-36: Editing Profiles - Wireless Security -
LEAP

Figure 5-37: Editing Profiles - Network Settings

37