Table of Contents
Advertisement
Appendix C
Appendix C:
Windows XP Wireless Zero
Configuration
Windows XP Wireless Zero Configuration
NOTE:
If you have WPA2 wireless security, refer
to Update for Windows XP (KB893357) on the
microsoft.com website to be able to connect
correctly.
If your computer is running Windows XP, then this choice
will be available. If you want to use Windows XP Wireless
Zero Configuration to control the Adapter, instead of
using the Linksys Wireless Manager, then click the Wireless
Manager icon, and select Close from the pop-up menu.
Linksys Wireless Manager Icon—
Connected to a Wireless Network
Wireless Manager Icon Pop-up Menu
NOTE:
For more information on Windows XP
Wireless Zero Configuration, refer to Windows
Help.
If you want to switch back to the Wireless Manager, go
to Start > All Programs > Linksys Wireless Manager >
Linksys Wireless Manager.
Start > All Programs > Linksys Wireless Manager
Wireless-N PCI Adapter with Dual-Band
Windows XP Wireless Zero Configuration
New Wireless Connection
1.
After installing the Adapter, the Windows XP Wireless
Zero Configuration icon appears in your computer's
system tray. Double-click the icon.
Windows XP Wireless Zero Configuration Icon
2.
The screen that appears will show any available
wireless network. Select the network you want. Click
Connect.
If your network does not have wireless security
enabled, go to step 3.
If your network does have wireless security enabled,
go to step 4.
NOTE:
Steps 2 and 3 are for Windows XP with
Service Pack 2 installed.
Available Wireless Network
3.
If your network does not have wireless security enabled,
click Connect Anyway to connect the Adapter to your
network.
No Wireless Security
13
Advertisement
Table of Contents
