Panasonic DMCFZ40 - DIGITAL CAMERA - ADVANCED FEATURES Operating Instructions Manual page 34

[MF ASSIST]
•
Refer to P74 for details.
q [ECONOMY]
•
Press the shutter button halfway or turn the camera off and on to cancel [SLEEP MODE].
•
[SLEEP MODE] is set to [5MIN.] in the Intelligent Auto Mode
•
[SLEEP MODE] is fixed to [2MIN.] when [AUTO LCD OFF] is set to [15SEC.] or [30SEC.].
•
Press any button to turn on the LCD monitor again.
•
[AUTO LCD OFF] does not work while operating menu or Playback Zoom.
•
[SLEEP MODE] does not work in the following cases.
–
When using the AC adaptor
–
When connecting to a PC or a printer
– When recording or playing back motion pictures
–
During a slide show
–
[AUTO DEMO]
•
[AUTO LCD OFF] does not work in the following cases.
–
When using the AC adaptor
–
When connecting to a PC or a printer
–
While the Self-Timer is set
– When recording or playing back motion pictures
–
During a slide show
–
While the menu screen is displayed
–
[AUTO DEMO]
Preparation
In Manual Focus, the assistance screen appears on the center of
the screen to facilitate focusing on the subject.
[OFF]
[ON]:
The center of the screen is enlarged over the whole screen.
You can conserve the battery life by setting these menus.
Also, it will turn off the LCD monitor automatically when not in use
to prevent discharge of the battery.
p [SLEEP MODE]:
The camera is automatically turned off if the camera has not been
used for the time selected on the setting.
[OFF]/[2MIN.]/[5MIN.]/[10MIN.]
[AUTO LCD OFF]:
The LCD monitor is automatically turned off if the camera has not
been used for the time selected on the setting.
[OFF]/[15SEC.]/[30SEC.]
- 34 -