Usb Photo Display; Specifications; Display Resolutions - Insignia NS-19LD120A13 Important Information Manual

USB photo display

Problem Solution
Photos are not displayed • Make sure that your USB flash drive is connected
securely to the USB jack on the back of your TV.
• Press INPUT and make sure that USB (Photos) is
selected.
• Make sure that the photos on the USB flash drive are
JPEG image files with ".jpg" as the file extension.
Slideshow does not start • Make sure that you select slideshow when you are in
thumbnail mode. See "Viewing photos in a
slideshow" in the online User Guide.
Notes
• If the problem is not solved by using these
troubleshooting instructions, turn off your TV,
then turn it on again.
• Additional troubleshooting information is in
your online User Guide. Go to
www.insigniaproducts.com, click Support &
Service, enter your model number in the
Product Search field, then click Search.
6

Specifications

Specifications are subject to change without notice.
Dimensions and weight
Without stand
With stand
Screen
Screen size measured
diagonally
Display type
Panel 60 Hz vs.120 Hz
Display resolution
Panel resolution
Aspect ratio
Contrast ratio (typical)–panel
Dynamic contrast ratio–
list value
Brightness (center typical)
cd/m2
Comb filter
Response time
Horizontal viewing angle
Vertical viewing angle

Display resolutions

HDMI 1.3
Component video
Tuner
Analog
Digital
Inputs
HDMI/DVI
Component video
Composite video
Shared audio (component
and composite)
S-Video
PC/VGA
3.5mm PC audio input
USB
Outputs
Video
Analog audio
Digital audio
WiFi
Ethernet
Headphone
Audio
Speakers
www.insigniaproducts.com
18.5 × 12.74 × 2.8 in. (47 × 32.4 × 7.2 cm)
8.8 lbs. (4.0 kg)
18.5 × 14.4 × 7.2 in. (47 × 36.6 × 18.3 cm)
9.5 lbs. (4.3 kg)
18.5 in.
LCD
60Hz
720p
1366 (H) × 768 (V)
16:9
1000:1
2000:1
250 nits
3d y/c digital
5 ms
150
140
1080p, 1080i, 720p, 480p, 480i
1080p, 1080i, 720p, 480p, 480i
NTSC
ATSC, 8-VSB, Clear-QAM
1 (side)
E-EDID compliant
HDCP compliant
1 (back)
1 (side)
Yes
No
1 (side)
1 (side)
1 (back)
Supports JPEG and firmware upgrade
No
No
1 coaxial (back)
No
No
1 (side)
Number: 2
Watts per channel: 2.7W