Viewing The Connection Panel - Samsung HL-T6756W Owner's Instructions Manual

1 POWER
Press to turn the TV on and off.
2 Remote Control Sensor
Aim the remote control towards this spot on the TV.
3 Indicator Lights
Blinks and turns off when the power is on and lights up
in stand-by mode.
4 SOURCE
Toggles between all the available input sources
(TV, AV1, AV2, AV3, S-Video1, S-Video2, S-Video3,
Component1, Component2, PC, HDMI1, or
HDMI2/DVI).
5 MENU
Press to see an on-screen menu of your TV's features.
➢ ● You can use the channel selection buttons to switch on the TV when it is in standby mode depending on the model.
● When using the on-screen menu the volume adjustment and channel selection buttons have the same function as the
▲/▼/◄/► buttons on the remote control.
● If the remote control no longer works or you have lost it, you can use controls on the panel of the TV.
Indicator Light Key
( : On, : Blinking, : Off)
STAND BY/TEMP TIMER
➢ ● It takes about 30 seconds for the TV to warm up, so normal brightness may not appear immediately.
● The TV has a fan to keep the inside lamp from overheating. You'll occasionally hear it working.

Viewing the Connection Panel

Side Panel Jacks
Use the right side panel jacks to connect a component that is used only occasionally (a camcorder or video game, for example). The
product color and shape may vary depending on the model.
LAMP
Standby state.
The picture will automatically appear in about 15 seconds.
Auto Timer ON/OFF has been set and the set will automatically be turned on in about 15 seconds.
A cooling fan inside the set is not operating normally.
Lamp cover on the rear of the set is not properly shut.
Check if the ventilation hole on the rear of the set is blocked, because if the inner temperature is too
high, the power will shut off.
Lamp may be defective. Please contact a certified technician.
1 S-VIDEO
Connect an S-Video signal from an S-VHS VCR or DVD player.
2 VIDEO
Connect the video signal from a camcorder or video game.
3 AUDIO (L/R)
Connect the audio signal from a camcorder or video game.
English - 8
6 + VOL –
Press to increase or decrease the volume.
In the on-screen menu, use the + VOL – buttons as
you would use the ◄ and ► buttons on the remote
control.
CH
7
Press to change channels.
In the on-screen menu, use the
you would use the ▲ and ▼ buttons on the remote
control.
(ENTER)
8
Press to confirm a selection.
Indication
buttons as
CH
Continued...