Panasonic UF 4000 - Laser Fax B/W Software Instruction Manual page 73

File Menu
Click the button to set the detail parameters
Open Details
when launching with an application.
1. Annotation
Select Paste when launching with annotations.
Select Paste Label if launching with Label Annotation.
2. File Format
Set the file format when launching with an application.
3. Compression
Set the compression mode when launching with an
application.
4. Image Quality
Adjust the image quality when the JPEG file format is
selected.
5. Image Type
Set the image type.
6. Halftone
Set the halftone mode when the Internet Fax, TIFF file
format is selected.
7. Resolution
Set the data resolution when launching with an application.
8. Paper Size
Set the paper size when the Internet Fax, TIFF file format
is selected.
9. Correct
Select Eliminate Noise or Correct Skew.
10.Original Document
Select whether to update the attached original file if the file
is edited within the application.
11.Parameter
Set the parameter when opening an application.
12.Transmission Check Message
Select whether to show a verification message when
sending a data to the application.
13.When Opening "xx" Number of Windows
Set the number of application windows to open. If the file
requires a number of the application windows to open, a
verification message is displayed before the file is opened.
1. See "Setting Plug-in" (page 50) to specify an external application.
NOTE
Continued on the next page...
Document Viewer
73