Flash Bios Method Introduction - Gigabyte GA-7N400 Pro2 User Manual

Flash BIOS Method Introduction

Method 1 : Dual BIOS
A. What is Dual BIOS Technology?
Dual BIOS means that there are two system BIOS (ROM) on the motherboard, one is the
Main BIOS and the other is Backup BIOS. Under the normal circumstances, the system works on
the Main BIOS. If the Main BIOS is corrupted or damaged, the Backup BIOS can take over while
the system is powered on. This means that your PC will still be able to run stably as if nothing has
happened in your BIOS.
B. How to use Dual BIOS and Q-Flash Utility?
1.) After power on the computer, pressing <Del> immediately during POST (Power On Self Test) it
will allow you to enter Award BIOS CMOS SETUP, then press <F8> to enter Flash utility.
CMOS Setup Utility-Copyright (C) 1984-2003 Award Software
Standard CMOS Features
Advanced BIOS Features
Advanced Chipset Features
Integrated Peripherals
Enter Dual BIOS / Q-Flash Utility (Y/N)? Y
Power Management Setup
PnP/PCI Configurations
PC Health Status
ESC: Quit
F8: Dual BIOS / Q-Flash
1 For GA-7N400 Pro2 only. 2 For GA-7N400 only. 3 For GA-7N400-L only.
N400 Pro2 / N400 Series Motherboard
/ Q-Flash
(1)
: Select Item
F10: Save & Exit Setup
- 68 -
Frequency/Voltage Control
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving