DS SERIES PREPARATION Getting Started Thank you for purchasing the DS Series car speakers. Although Dual has attempted to make sure all of the information contained within this manual is accurate, please be aware that any part of it is subject to change without notice.
The following installation instructions are very basic. If you feel unsure about personally installing this speaker system, Dual recommends acquiring the services of a professional car audio installation center. Before installation, please follow these guidelines: 1. Be sure to carefully read and understand the instructions before attempting to install this product.
Page 4
DS SERIES INSTALLATION Mounting 1. Determine where the speakers will be mounted. Make sure the area is large enough for the speaker to mount evenly. Also ensure the mounting location is deep enough for the speaker to fit. 2. Refer to the specification chart to determine the proper diameter hole to cut for your speaker model.
MOUNTING HEIGHT TOP-MOUNTING DEPTH The diagram featured above is to be used in conjunction with the specifications matrix guide below: DS42 .38" 2.25" DS52 .44" 3.06" DS652 .38" 2.00" DS692 .38" 3.00" DS573 .40" 2.10" DS653 .40" 2.10" DS693 .40" 2.68" DS SERIES INSTALLATION CUT-OUT DIAMETER .25"...
This warranty gives you specific legal rights. You may also have other rights which vary from state to state. Dual Electronics Corp. warrants this product to the original purchaser to be free from defects in material and workmanship for a period of one year from the date of the original purchase.