EDIFIER IF200 Quick Operation Manual

IF200 Quick operation guide (prototype)

Docking your Ipod

Select socket position Select iPod model Dock your iPod Connect the power.

Setting up IF200 alarm function with your iPod.

st
You must finish this setup process before start to use for the 1 time, otherwise the
entire system will work rarely!
Step 1, Operate the iPod screen to main
menu, and make the "music" item selected.
(This is telling the IF200 where is the beginning of
the menu)
Step 2, Press & hold the "SNOOZE" key
until hear "double beeps" sound,
(This will start to enter the setup mode)
Step 3, Press shortly the "SNOOZE" key to
move down until highlight the "Extras" line.
(This is to tell the IF200 where the entrance of clock
screen)
Press shortly the SNOOZE key (which will cause
the selected element to move down) until it's
located over the "Extras" menu
Step 4, Long press the "SNOOZE" key until
hear 2 times "beep" again.
You will see the ipod menu start to move along to the
clock screen automatically. As shown.
Step 5, Press the "volume button" once to
finish setup.
For details about setting the alarm and clock time, refer
to your iPod's user's guide.