Dreambox DM 7000-S Instruction Manual: Reset Dreambox To Factory Settings

Dreambox instruction manual dm 7000-s.
Hide thumbs
16. DreamUp – operating software update
After the flashing is complete, you will receive a message from the software
that everything has been completed successfully. Click on „OK".

16.6 Reset Dreambox to factory settings

Your Dreambox is now updated with the selected operating software.
Close the program by clicking on „Exit".
Remove the power cable, the patch cable and the serial cable from your
Wait 20 seconds.
Plug the TV Scart plug and the coaxial cable (satellite system) into your
Dreambox. Plug the power cable into your Dreambox.
As soon as the Dream logo appears on your TV, press and hold down the
upper left key on your Dreambox, and do not release it until „flash erase"
appears in the display of your Dreambox.
Your Dreambox then resets itself, and returns to the TV broadcaster „ARD".
16. DreamUp – operating software update


   Also See for Dreambox DM 7000-S

This manual also for:

Dm 7000-s

Comments to this Manuals

Symbols: 0
Latest comments:
  • joginder singh Oct 21, 2014 07:07:
    i need to bay kontrol dream box send pris to me